
Description:
The
Rockville RCM03 condenser microphone performs better than famous branded
microphones that cost over $150. This model is similar to our RCM01
however it is made of aluminum, and the frame is slightly larger. We
also upgraded this model to a high end metal anti-wind cap! We highly
recommend this design. This model is an amazing upgrade to our top
selling RCM01 model!
Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified
instruments, as well as room reverb. The frequency pick up pattern makes
the RCM03 amazing in studio applications.
The aluminum construction makes the RCM03 tough enough for
Live sound applications as well!
Multiple connection options!
This microphone can be used in multiple ways. You can connect this to
the phantom power of your mixer or you can connect it directly to your
computer sound card. We include both cables! We include a cable to
connect it to your mixer as well as a cable to connect the mic to your
computer!
Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you
would expect from any Rockville product. This microphone has a large
diaphragm which is what enables our mic to deliver a wider range of high
and low frequencies than our competitors. Our frequency range is tested
at 30HZ – 20KHZ! The mic sounds crystal clear sound with no
distortion!
The PCB (circuit board) uses surface mounted components which is the
same method the expensive brands use. We use only top components that
under-go extreme testing by our own audio engineers.
The last thing that I need to mention and call out is that our product
is very sturdy. Let me explain. When you are recording, you do not want
even the slightest noises coming from your mic. The microphone consists
of a casing and there is a cartridge inside the case. You do not want
that cartridge moving around. We made sure to adjust our mechanism and
ensure the cartridge is firmly in place and not creating any unwanted
noises.
Best Value
After testing our Rockville condenser mics against mics that cost 300%
more money, we found ours to be as good or better than the ones we
tested against.
What s Included:
- RCM03 Condenser Microphone (made of aluminum!)
-
- 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
-
- 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
-
- Metal shock mount
-
- Metal Anti-wind foam cap
-
- Owners Manual
-
- Warranty card
-
Features:
- Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
-
- Aluminum high quality construction
-
- Polar Pattern: Internally Polarized Condenser Cardioid Design
-
- Large diaphragm for smooth, natural sound and low noise
-
- Power Requirements: 48V DC Phantom Power
-
- Uni-directional
-
- Sensitivity: -27dB±2dB(0dB=1V Pa at1kHZ)
-
- Output impedance: 200O±30%(at 1kHz)
-
- Standard operating voltage: 3V
-
- Operating voltage range: 1.5V-10V
-
- Current consumption: less than 500uA
-
- Voltage deduction characteristic: within 3dB at 2V
-
- S N ratio: More than 24dB
-
- Frequency Response: 30Hz – 20 KHz
-
- Fixed Crossover Filter cutoff frequency: 40Hz—16 KHz
-
- Load impedance: Greater or = to 1000 Ohms
-
- Equivalent Noise level: Less than 18dB A (IEC581-5)
-
- Max. Input SPL: 126dB(THD=1.0% at 1kHZ)
-
- Electrical current: Greater than 4.8Ma
-
- Microphone body net weight:320 Grams (0.7 Pounds)