DBX 234S Stereo 2 3 Way Mono 4-Way 2 Ch. Crossover +(3) Samson Mics+Mic Clips For Sale

Description
Package Includes:
- (1) DBX 234S Stereo 2 3 Way Mono 4-Way Professional Crossover, Rack Mount, 2 Channel
- (1) Samson Q6 3-Pack Dynamic Vocal Cardioid Handheld Microphones+Mic Clips+Foam Case
-
- dbx 234S Stereo 2 3 Way Mono 4-Way Professional
Crossover, Rack Mount, 2 Channel- TRS Differentially Balanced Ins and Outs
- Mode Switches for Mono 4-Way or Stereo 2-Way 3-Way
Operation- Low Frequency Summed (Subwoofer) Output
- 10 Range Switch on Both Channels
- 40Hz High Pass (Low Cut) Filter Both Channels
- Phase Reverse Switch On All Outputs
- Individual Level Controls On All Outputs
- 24dB Per Octave Linkwitz-Riley Filters (The
Professional Standard)- Stereo Mono Status LEDs Indicate the Selected Mode
- dbx® 2 Year Parts and Labor As Standard
- CSA NRTL C Approved
- CE Compliant
- Input Connectors: 1 4 TRS
- Input Type: Electronically balanced unbalanced, RF
filtered- Input Impedance: Balanced >50k Ohm, Unbalanced > 25k
Ohm- Max Input: >22 dBu balanced or unbalanced
- CMRR: >40dB, typically >55dB @ 1 kHz
- Output Connectors: 1 4 TRS
- Output Type: Impedance-balanced unbalanced, RF
filtered- Output Impedance: Balanced 200 Ohm, unbalanced 100
Ohm- Max Output: >21 dBu balanced unbalanced into 2k ohms
or greater- Bandwidth: 20 Hz to 20 kHz, + -0.5dB
- Frequency Response: < 3 Hz to > 90 kHz, +0 -3 dB
- Signal-to-Noise Ratio: Ref: +4 dBu, 22 kHz
measurement bandwidth- Signal-to-Noise (Stereo Mode): >94dB (Low Output),
>93dB (Mid Output), >90dB (High Output)- Signal-to-Noise (Mono Mode): >94dB (Low Output,
Low Mid Output); >92dB (High Mid Output); >88dB (High Output)- Dynamic Range: >106 dB, un-weighted, any output
- THD: < 0.004% at +4 dBu, 1 kHz; < 0.04% at 20 dBu, 1
kHz- Inter-Channel Crosstalk: < -80 dB, 20 Hz to 20 kHz
- Crossover Frequencies (Stereo Mode): Low Mid: 45 to
960 Hz or 450 Hz to 9.6 kHz- Crossover Frequencies (Mono Mode): Low Low-Mid: 45 to
960 Hz or 450 Hz to 9.6 kHz- Crossover Filter Type: Linkwitz-Riley, 24 dB octave,
state-variable- Controls: Low Cut Switch, Phase Invert Switch, Mode
Switch, x1 x10 Switch, LF Sum Switch- Indicators:
- Green: Stereo Operation
- Yellow: Mono Operation
- Red- Per Channel: Low Cut Filter
- Green- Per Channel: x10
- Red- Per Output: Phase Invert
- Operating Voltage: 100-120 VAC 50 60 Hz
- Operating Temperature: 32°F to 113°F
- Power Consumption: 15W
- Power Connector: IEC Receptacle
- Product Dimensions (H x W x D): 1.75 x 19 x
6.9
inches- Product Weight: 4.0 Lbs.
- SAMSON Q6 3-Pack Dynamic Cardioid Handheld
Microphones + Mic Clips + Foam Case- Ultra sensitive element picks up all of the nuances
of any performance.- Super-cardioid polar pattern minimizes feedback
problems and effectively rejects signals not originating directly in front
of the mic capsule.- Extended range frequency response for optimum
reproduction and exceptionally clear, crisp sound.- Handy ON OFF switch for on-stage control.
- Special shock-mounting allows movement of the mic
element to greatly reduce handling noise.- Rugged zinc alloy die-cast case ensures reliable
performance in even the most demanding environments.- The Q6 can be mounted on any standard microphone
stand (using the included mic clip).- Withstands high SPLs, lending itself to a wide range
of miking situations.- Low impedance output lets the Q6 send a strong full
bandwidth signal over long cable runs.- Type: Dynamic
- Frequency Response: 50HZ – 15 kHz
- Polar-Pattern: Super-Cardioid
- Output Impedance: 500 Ohms
- Sensitivity: -50 dBV Pa (3.2mV Pa)
- Connector: 3-Pin, Gold Plated, Balanced XLR Male
- Product Diameter: 2.09 inches
- Product Total Length: 6.5 inches
- Product Weight: 9.52 oz.
Authorized Samson Dealer
Description of SAQ6CL3P:
The Q6 dynamic microphone
brings a high level of accuracy and audio performance to vocal micing
applications thanks to its low mass, neodymium element. The Q6 is a hand held,
dynamic microphone that excels in both live performance and recording
applications. Equipped with a linear frequency response for superior
reproduction, it is also designed to withstand high sound pressure levels.
Extremely sensitive, it employs a tight super-cardioid pattern to reduce
feedback. A special shock-mounted element minimizes handling noise and provides
additional protection.Features:
Specifications:
Authorized dbx Dealer!
Description of 234s:
More sound to your amps and speakers
The secret to making speakers sound great lies with the crossover you use. With
the dbx 234s Crossover you ll get great performance, ultra low-noise, rugged
reliability and four decades of dbx knowledge and expertise in building the
world s finest processors. The 234s uses precision filters to separate the audio
signal and direct the correct frequencies to your loudspeaker drivers. By
directing only the specific frequency bands to each speaker driver the 234s
leaves your amplifiers free to use their full power on the usable signal
eliminating distortion and giving your PA system a cleaner and better sound.The dbx 234s is a dual channel crossover with all the features you would expect
from a professional product. It features Linkwitz-Riley 24dB per octave filters,
independent output gain controls for level matching, output phase inversion, 40
Hz low cut filter, and optional mono summing of the low frequency (subwoofer)
output. Everything in the design exudes great precision from the solid click
controls to the high quality 1 4 TRS inputs and outputs.Features:
- dbx 234S Stereo 2 3 Way Mono 4-Way Professional
Additional Information
Title | Default Title |
---|