(2) ALPINE S-W12D4 12 1800w Subwoofers+Vented Sub Box+Mono Amplifier+Amp Kit For Discount
Description
Package Includes:
- (2) Alpine S-W12D4 12 1800 Watt Dual 4-Ohm Car Audio Subwoofers Sub Type-S SW12D4
- (1) Rockville RDV12 Dual 12 Vented Subwoofer Enclosure Box 1.55 CU FT 3 4 MDF
- (1) Rockville KRYPTON M4 6000w Peak 1500w RMS Mono 1 Ohm Car Amplifier Amp+Remote
- (1) Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
-
- 12 Dual Voice Coil (4 Ohm) High Performance Subwoofers
- Max RMS Power Capacity: 600W RMS
- Peak Power Capacity: 1800W Peak Power
- 12” 2O+2O Subwoofer
- Power Handling: 600W – 1800W
- High Strength Custom Steel Frame
- Great complement to V-Power Amplifiers
- Frequency Response: 26Hz-200Hz
- Mounting Depth 5-1 16”
- Recommended Sealed Box: 0.85 cubic foot (gross volume)
- Recommended Vented Box: 1.71 cubic foot (gross volume), 12.5” x 1” vent area, 16” vent length
- Minimum Sealed Box Volume 0.55 cubic feet
- Maximum Sealed Box Volume 1.0 cubic feet
- Minimum Ported Box Volume 1.0 cubic feet
- Maximum Ported Box Volume 1.5 cubic feet
- Cutout Diameter 10-9 16
Krypton Series (Product Video):
Recommended enclosure Specifications:
Description of S-W12D4:
The S-Series subwoofers are designed with increased bass output and
installation versatilityVersatile Applications
Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been
re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers
are almost 1” more shallow than previous models at just over 4.5” for the 10”
models and just over 5” for the 12” models, allowing them to fit into a wide
variety of installation applications.600W Power Handling
The 10” and 12” S-Series subwoofers are engineered with an
improved voice coil allowing the woofer to benefit from an increased power
rating of 600 watts. Match them with the powerful VPower MRV-M500 mono amplifier
for a great subwoofer system.Custom-Stamped Steel Frame
Each S-Series subwoofer uses a custom –
stamped steel frame. These high-strength frames were designed to withstand the
rigors of the im proved S-Series motor. They have frame leg vents as well as a
vented back plate to help cool the subwoofer voice coil and motor parts, plus a
shallow design to help fit in smaller spaces.Push-Type Insert Terminals With Dual Voice Coil Jumper System
The push-type insert terminals help reduce
the installation time of the S -Series subwoofers.Just strip the speaker
insulation at the wire end, then insert the bare wire into the hole of the
spring-loaded push terminal.Strontium Ferrite Double-Stacked Magnets
The S-Series subwoofers use two strontium ferrite magnets stacked together, for
increased motor strength and excursion which ultimately leads to more bass
output.
Clean, Concealed Mount Gasket System
The S-Series subwoofers have concealed mount gaskets, creating a clean, finished
appearance for any vehicle.Features::
- 12 Dual Voice Coil (4 Ohm) High Performance Subwoofers