Description:
The dB14 is a mono amplifier with 4,000 watts peak output and 1000 watts Dyno Certified power. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.
One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. The dB14 features a Maxi fuse with a rating of 100 Amps. Although we rate these conservatively at 1000 watts Dyno Certified RMS @ 2 ohms, this amplifier puts out more power than this!
This amp has a fully adjustable 12dB Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The dB14 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels.
The RCA input accepts both balanced and un-balanced inputs. If there is potential inference in the car, the balanced input signal is less susceptible to noise.
The dB amps by Rockville use the top parts and components recommended by Rockville’s very own engineer. These amps are the best sounding out of any series we have ever created. They perform more efficiently resulting in even dB of sound. We created them to be 2 ohm stable just like the world’s most famous amps by Rockford Fosgate, Kicker, etc. If you compare our amp to the most famous amps you will find our amp can compete and, in my opinion, surpass the performance of anything in its class.
Each and every amplifier we manufacture is tested twice. Once at the semi-finished PCB stage of production, and then another test is done at the final assembly. We also run age tests on them. After this is all done, we hire a 3rd party independent company unaffiliated with our factory or with us to go to the factory and inspect 20% of all the production items. We test the power, the controls, and over 20 other tests. We guarantee these amps will satisfy you. We are so confident in your satisfaction of this amplifier that we will offer you a 90 day money back guarantee. If this amp does not perform as well as you expected we will send you a pre-paid shipping label and give you all of your money back. This means if for any reason you want to return the amplifier back for a full refund within 90 days, you can! (Amp must be complete along with the box).
Includes:
- Amplifier
-
- Bass Remote
-
- Birth sheet with tested power
-
- Owner’s manual
-
- Mounting Screws
-
- Warranty
-
Features:
- Rockville dB14 4000 Watt Peak 1000 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp
-
- Dyno Certified RMS Power Ratings: (Certified Dyno Test Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
– 2 Ohm: 1000 Watts x 1 Channel <1% THD+N
– 4 Ohm: 600 Watts x 1 Channel <1% THD+N
-
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
– 2 Ohm: 4000 Watts x 1 Channel
– 4 Ohm: 2400 Watts x 1 Channel
-
- High-Speed MOSFET Power Supply
-
- Optical Coupler Class “D” Technology
-
- Fully Adjustable 12dB Octave Crossover with Differential Circuitry
-
- Low Pass Filter: 50Hz – 250Hz
-
- Subsonic Filter: 15Hz – 55Hz
-
- Phase Control Switch
-
- Full IC-Controlled Protection Circuitry
-
- Remote Dashboard Subwoofer Control
-
- Fully Adjustable 12dB Bass Equalizer
-
- Mute and Delay Soft Start System
-
- RCA Preamp Line Output
-
- 8 Volt Preamp Circuitry
-
- Status Mode LED Indicator
-
- Minimum THD at Rated Power: <0.1%
-
- S N Ratio: >90dB
-
- Under Voltage Protection at 10V
-
- Over Voltage Protection at 16V
-
- Frequency Response: 15Hz – 250Hz
-
- Damping Factor: >150 @ 100Hz
-
- 100 Amp Maxi Fuse
-
- Dimensions: (W x H x L) 9 x 2.4 x 15.5
-
Description of RDV12M:
The RDV12M is a dual 12 vented dual chamber subwoofer box is made in the USA with Grade “A” ¾” MDF wood. This
enclosure is made for subs that require larger air space. Each chamber
nets 2.0 cubic feet of air space. This enclosure is made with precision
cutting machinery by industry experts that have been making these
enclosures in the USA for over 20 years. All Rockville enclosures come
with a customized enhanced glue that is unmatched by any other
manufacturer. That means that the carpet will stay in place and not rip
or tear. The ¾” USA MDF is much stronger then any type of import wood.
This will keep your box performing at an optimal level by not flexing
and distorting your woofers. Your woofers will thank you! EVERY
Rockville enclosure is not only glued at all joints but stapled as
well. If that wasn’t enough we add a layer of silicon to every seam!
This makes your Rockville enclosure rock even more!
MADE IN THE USA WITH PRIDE!
Features:
- Rockville RDV12M Dual 12 3.98 cu.ft. MDF Dual Chamber Subwoofer Enclosure Box
-
- Designed For 12 Subwoofers
-
- Machine precision cut mounting holes
-
- ¾” USA Heavy Duty MDF Construction
-
- Top of the line Glue for extra durable adhesion
-
- High quality GOLD spring loaded terminals
-
- Designed, tested, and engineered to work perfectly with high powered subs
-
- Designed to give the best sound quality
-
- Tuning frequency: 41Hz
-
Enclosure Measurements:
- Type of Enclosure: Dual Vented Chamber
-
- Enclosure Sub Size: Dual 12
-
- Dimensions in Inches: 34 L x 18 W x 15 H
-
- Top and Bottom Depth: 15
-
- Mounting Depth: up to 11 (enough depth for any sub on the market)
-
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 5.31 Cubic Feet
-
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 3.98 Cubic Feet
-
